About the ON1 Photo RAW Project

The ON1 Photo RAW Project gives you the chance to be a part of what we're developing at ON1. You have a voice in the future of photo editing. Your ideas will help us deliver the best available apps for photography, give us insight into what's most important, and help spark innovation.

You must log in to submit an idea.

Share Your Ideas

Share your ideas for new Photo RAW features. Make sure you write a convincing description. Remember, people won't be able to give an idea a high rating unless they understand the idea completely.

Tell Your Friends

With supporters, your ideas will get higher ratings. In fact, tell everyone you know to support your idea. The more ratings an idea gets, the more likely it will be sent to our product development team.

ON1 Will Review It

After an idea reaches 200 ratings with a 3-star or higher rating, the project team will review the details and begin asking questions. We can't put every good idea into development, but we'll try!

ON1 Photo RAW Ideas

Average rating: 4.7

Average rating: 4.7
Leave a Comment

Organize LUTS like presets

With the power of LUTs being added, I see a proliferation of user downloaded LUTs becoming cumbersome without the ability to create folders, subfolders and easily move LUTs between folders. It would also be nice to have custom LUTs show up in the Quick View Browser tab like custom presets.

This idea was tagged , on August 1, 2018.

Average rating: 3.6

Average rating: 3.6
1 Comment

Ability to Eject Drive from the Browse module

Hi, would be useful to be able to Right Click and eject a camera card from its drive from within the Browse Module. Without this I have to go to Finder and then eject from there, would just save an unnecessary few of steps (Launch Finder, scroll to drive, Eject)

This idea was posted on July 30, 2018.

Average rating: 4.4

Average rating: 4.4
Leave a Comment

Sony RX100 M6 support

I would appreciate support of Sony RX100 M6 raw files and lens correction for this camera. Then I would buy ON1 Photo.

This idea was tagged on July 28, 2018.

Average rating: 4.7

Average rating: 4.7
Leave a Comment

Automatically scroll to active folder when expanding Cataloged Folders

In Browse when you expand the Cataloged Folders automatically scroll to the folder with the active photo.  Now, you have to roll through the folder structure from the root level to arrive at the folder with the active photo.

This idea was tagged on July 25, 2018.

Average rating: 4.0

Average rating: 4.0
Leave a Comment

Panasonic TZ110

The Panasonic DMC TZ110 is the  Australian version of the Panasonic  DMC ZS100 (US) and Panasonic DMC TZ100 (UK). Both the UK and US versions are supported by ON1. Could you please add support for the AU version. Note: I have changed the metadata of my RAW files to the US model and ON1 lens...

This idea was tagged on July 24, 2018.

Average rating: 4.8

Average rating: 4.8
1 Comment

On screen reference for 18% gray

The problem is how to calibrate the screen brightness for editing. This can be an issue if the screen brightens forces the apparent 18% gray lighter or darker that normal.  Some photographers shoot an 18% gray target and/or white card with each session so that they can accurately color balance their work in post-processing.  I...

This idea was tagged on July 20, 2018.

Average rating: 4.7

Average rating: 4.7
Leave a Comment

Keyword Manager

There are more than a dozen ideas on how to handle keywords in ON1 RAW.  Is it not obvious that we need a keyword manager. We need easy additions, display, search that is highly integrated into the Browse Module. Intelligent keyword suggestions would be the ultimate options in the manager function.

This idea was tagged on July 19, 2018.

Average rating: 4.0

Average rating: 4.0
3 Comments

Manual Lens Profile Selection

Would be nice to be able to manually select the manufacturer and model of any lens in the database (similar to Lightroom).  Presently this is not allowed.  I use a Sony A7ii with lenses from Leica, Canon and Zeiss.  None of them are automatically set in the EXIF info and therefore, the lens correction settings...

This idea was tagged on July 19, 2018.

Average rating: 4.3

Average rating: 4.3
Leave a Comment

Filter empty fields, and more fields to filter by

Finding incomplete meta data should be easier. At minium: Filtering by “empty” fields (ie: where no Keywords, City, etc.. are set). More fields in Advanced to filter (ie: IPTC Sublocation, City, State, Country, etc…).  

This idea was tagged , on July 16, 2018.

Average rating: 4.5

Average rating: 4.5
Leave a Comment

Scale Curves bigger

83/5000 I would like to enlarge the curve tool to be able to work on the curves better

This idea was tagged on July 12, 2018.

Average rating: 5.0

Average rating: 5.0
Leave a Comment

Choose jpg as default for raw+jpg grouping

I would like the possibility to choose to have the jpg as the default for raw+jpg groups. I often use the jpg and have the raw as backup if I need to do some heavier editing. The jpg will also show how the camera interpreted the scene with it’s camera profiles.

This idea was tagged on July 12, 2018.

Average rating: 3.0

Average rating: 3.0
1 Comment

Choose color of lens flare!

I don’t understand why the lens flare effect looks so weird in ON1 Photo RAW. I want a natural looking lens flare with sunny colors, I always get that RED flare which absolutely is useless in all my cases! Unfortunately, I can’t attach images here directly, so I will link to an external site in...

This idea was tagged on July 12, 2018.

Average rating: 4.4

Average rating: 4.4
Leave a Comment

Uniform Cropping Tool

In the layers module, there are more preset ratios (paper sizes, Photographic, Square, Video, & Custom)in addition to the ones offered on Develop & Effects. I would like to have these options available in the other modules as well because I don’t like wasting time changing to the layers module just because the crop I’m...

This idea was tagged on July 9, 2018.

Average rating: 4.7

Average rating: 4.7
Leave a Comment

Metadata – Keyword Listing

Hi Guy’s The Problem: I photograph wild Flora and Fauna, including insects and birds. My macro shoots create dozens of images of the same subject at specific locations but not the same date and time so I want to retain multiple images of the subject in an album or folder. I’m finding I’m continually have...

This idea was tagged , on July 8, 2018.

Average rating: 3.7

Average rating: 3.7
Leave a Comment

Rename files

Hi, since last update it’s possible to delete a picture directly from Develop or Effect module. No need anymore to get back to browse and bla bla bla … waste of time and more important losing the focus on your work. So i’m really happy with that. But ( there’s always a but ) why...

This idea was tagged on July 8, 2018.

Average rating: 4.0

Average rating: 4.0
Leave a Comment

Recently Used Filters

Please bring back the “Recently Used” feature for filters. I was recently told by your support team that currently the “Recently Used” tab only works for presets and images. In older versions of your software there used to be about 9 recently used filter formulas. I found this very useful and would like to see...

This idea was tagged on July 7, 2018.

Average rating: 5.0

Average rating: 5.0
1 Comment

Add the ability to filter images that have been edited.

There is an icon on thumbnails to indicate that images have been edited. I would like to be able to filter so that I can view all edited files, or more usefully all files which have not yet been edited. I currently add a colour flag (when I remember) but since On1 knows why not...

This idea was tagged on July 6, 2018.

Average rating: 2.7

Average rating: 2.7
Leave a Comment

Change the white border when soft proofing to black or dark grey.

Click the soft proofing icon and the border around the photo turns white. I guess it is suppose to simulate paper. But on a 27 inch screen the white glare makes it difficult to see the subtle difference between before and after. I can get around it by expanding the image to 100% but why?...

This idea was tagged on July 5, 2018.

Average rating: 3.0

Average rating: 3.0
Leave a Comment

Stay in Crop tool when going to next image / Straighten tool slider should be visible by default.

1 . I would like to go to the next image while using the crop tool. In Lightroom this works when just using command + right cursor. And while you are in crop mode the normal cursor just work to finetune the position until you , the user , goes out of the crop tool, and...

This idea was tagged on July 4, 2018.

Average rating: 4.3

Average rating: 4.3
1 Comment

Show rating and likes also in the develop module

It’s often, that I develop a picture and set or modify my rating just after. It would be nice to get the rating panel also in the develop module. Currently I have to switch back to the browse module to do this task

This idea was tagged on July 3, 2018.

Status: Launched

Average rating: 4.4

Average rating: 4.4
Leave a Comment

Add an operator in the advanced filters criteria

In the advanced filter add the ability to have an operator including “equals, greater than, less than, does not equal, contains, contains all, does not contain, is between, etc etc etc” This would allow criteria like Keywords does not contain xxxxx Date between xx and yy Filename contains all “wordone wordtwo”  

This idea was tagged on July 2, 2018.

Average rating: 4.3

Average rating: 4.3
Leave a Comment

Flatten mask for inversion

A mask look may be obtained via the window & levels sliders. Inverting such a mask does not give you the negative pixel representation of such a mask. I would like to be able to invert the final look of the mask not the slider settings beneath it!   In a way I’d like to...

This idea was tagged on July 2, 2018.

Average rating: 4.8

Average rating: 4.8
Leave a Comment

Combine multiple masks

Be able to have multiple masks per effect/layer and control how we can combine them to achieve the final “active” mask.   For example: Color range mask + luminosity mask = resulting mask could for example be the union of the two.

This idea was tagged on July 2, 2018.

Average rating: 4.5

Average rating: 4.5
1 Comment

Keyboard Shortcuts Menu and Key-Bindings Export

Hi, I’ve seen a lot of people asking for all kinds of keyboard shortcuts (I’ve the ideas for this one searched before), however, I believe it would be much easier to create a menu for this issue, similar to all kinds of IDE’s for programming. If you’ll add an “export key-bindings” to a file, people...

This idea was tagged on July 1, 2018.

Average rating: 4.9

Average rating: 4.9
Leave a Comment

Frequency Separation for Sharpening

I’ve recently begun to use Frequency Separation for sharpening in Photoshop, and the results are stunningly good-sharp images without increased noise and artifacts, as well as complete control over sharpening.  

This idea was tagged on June 29, 2018.

Average rating: 4.0

Average rating: 4.0
Leave a Comment

Hasselblad X1D support

Please provide direct support for the Hasselblad X1D. I can’t really switch from Lightroom to ON1 until you do. Thanks! René

This idea was tagged on June 28, 2018.

Average rating: 5.0

Average rating: 5.0
Leave a Comment

Deleting certain Metadata

In Keywords, if an entry is entered in error or with information you want to change you can’t delete it.  As a result you can have wrong information that pops up automatically with no way to delete it.  ex. type 2 and all options for a 24-70mm lens comes up.  If this lens no longer...

This idea was tagged on June 28, 2018.

Average rating: 4.8

Average rating: 4.8
Leave a Comment

Strip out exif data on export

Sometimes you don’t want to show people certain things like which camera you are using, it would be great to be able to strip out selected information fields on export like in Lightroom.

This idea was tagged , on June 28, 2018.

Average rating: 3.0

Average rating: 3.0
Leave a Comment

Star stacking — TIFF files without alpha channel

I was using ON1 to prepare nightscape / milky way RAW images for stacking by Starry Landscape Stacker (Mac OS). I exported the images as TIFF files which were rejected by Starry Landscape Stacker (SLS) as mask files. Reviewing the SLS website, I discovered a posting indicating an issue with ON1 TIFF files and suggesting...

This idea was tagged on June 28, 2018.

Average rating: 5.0

Average rating: 5.0
Leave a Comment

Create lens profile for Venus optics 105mm STF

You already have the other two wide angle Venus optic lenses listed, so why not this lens? That lens has been released about 3 years ago!

This idea was tagged on June 25, 2018.

How You Buy | How You Own

When you purchase ON1 Photo RAW 2018.5 you receive a perpetual license. That means the day you purchase ON1, you own it forever. No subscription. If you decide to become a member of ON1 Plus Pro, you will also receive a perpetual license of the latest versions of all the ON1 apps as part of your membership.

  • ON1 Photo RAW 2018 Upgrade
  • Launch Special

  • $99.99 $79.99

    Upgrade

    For owners of any ON1 product

  • NEW! ON1 Photo RAW 2018.5
  • 25 ON1 Cinematic Color Grading LUTs
  • 10 Hudson Henry Core LUTs
  • 10 Tamara Lackey Color for Dayz LUTs
  • 5 Matt Kloskowski Landscape LUTs
  • Monthly Loyalty Rewards
  • Free Technical Support
  • For Mac and Windows
  • 30-day Money Back Guarantee
Upgrade
  • ON1 Photo RAW 2018
  • Launch Special

  • $119.99 $99.99

    Full

    For new customers

  • NEW! ON1 Photo RAW 2018.5
  • 25 ON1 Cinematic Color Grading LUTs
  • 10 Hudson Henry Core LUTs
  • 10 Tamara Lackey Color for Dayz LUTs
  • 5 Matt Kloskowski Landscape LUTs
  • Monthly Loyalty Rewards
  • Free Technical Support
  • For Mac and Windows
  • 30-day Money Back Guarantee
Buy Now
  • ON1 Plus Pro
  • Launch Special

  • $149.99 $129.99/yr

    ON1 Plus Pro

    For owners & new customers

  • NEW! ON1 Photo RAW 2018.5 (perpetual license)
  • FREE upgrades with active membership
  • 25 ON1 Cinematic Color Grading LUTs
  • 10 Hudson Henry Core LUTs
  • 10 Tamara Lackey Color for Dayz LUTs
  • 5 Matt Kloskowski Landscape LUTs
  • Free Priority Technical Support
  • For Mac and Windows
  •  
Buy Now

View System Requirements »

Our Commitment to You:

100% Customer Driven

  • Customers tell us what they want and we build it
  • We deliver the training and skills needed to get the most out of your purchase
  • Each purchase is covered by our 30-day money back guarantee - no questions asked

No Subscription

  • When you purchase ON1 Photo RAW 2018.5 you receive a perpetual license
  • Never rent your software again
  • You own it forever

Get More with ON1

  • World-class Support and free video resources to get you up-to-speed quickly
  • Free weekly videos & monthly rewards
  • More free software updates
ON1 Photo RAW 2018

New ON1 Photo RAW 2018.5

Get an instant discount + bonus extras!

Email subscribers get the lowest prices! Subscribe and get an immediate discount. You may opt out at any time. View our privacy policy for GDPR compliance.