About the ON1 Photo RAW Project

The ON1 Photo RAW Project gives you the chance to be a part of what we're developing at ON1. You have a voice in the future of photo editing. Your ideas will help us deliver the best available apps for photography, give us insight into what's most important, and help spark innovation.

You must log in to submit an idea.

Share Your Ideas

Share your ideas for new Photo RAW features. Make sure you write a convincing description. Remember, people won't be able to give an idea a high rating unless they understand the idea completely.

Tell Your Friends

With supporters, your ideas will get higher ratings. In fact, tell everyone you know to support your idea. The more ratings an idea gets, the more likely it will be sent to our product development team.

ON1 Will Review It

After an idea reaches 200 ratings with a 3-star or higher rating, the project team will review the details and begin asking questions. We can't put every good idea into development, but we'll try!

ON1 Photo RAW Ideas

Average rating: 5.0

Average rating: 5.0
1 Comment
Could you please make the film strip slider bigger. It’s very hard to grab onto it and often the windows taskbar pops up and covers the filmstrip slider. This wouldn’t happen if the bar was bigger. Using the keyboard arrows will move the filmstrip of course but it takes a lot of resources and will...
The Develop, Effects, Portrait, Local menu bar in the right column,  disappears when you scroll up through applied filters etc. How about pinning it to the top so it is always visible. Yes, there are keyboard shortcuts but it shouldn’t be that hard to have the menu always visible.
the font in ON 1 2019 is so small and faint that it is impossible for me to see.  I cannot scale the font inside ON 1 and reducing the resolution of my monitor makes font larger but decreases resolution of the photo.  Not good.  There should be a way to enlarge font size and...

Average rating: 5.0

Average rating: 5.0
1 Comment
Currently when you open ON1, it ‘greys’ all catalogs not available in accessible drives. However it does not behave the same way with Albums which have no photos in accessible drives. Like catalogs, albums too must be ‘greyed’.  

Average rating: 0

Please rate
Leave a Comment
When viewing an image with Fit View, there is no value in having decimal sizes, i.e., 34.32%. The decimal portion causes rendering artifacts due to floating point rounding errors. Rounding down to 34% provides a much clearer view of the image while minimizing the reduction in image view area.

Average rating: 4.4

Average rating: 4.4
1 Comment
Exporting in the background became available in version 2018.5. This is a great improvement. The problem is that the “switch” to change this setting is pretty well hidden. I could not find it and I had to ask support how to enable Background Exporting. I suggest two things. 1. make it easier to find the...
I have two suggestions regarding the Browser UI which in the LR are very useful to me, and if available in ON1 Photo Raw I’m sure they would be welcome by other users too 1. I’d like to see that the Filter and Albums windows remain sticked at the bottom of the screen instead of...
There is one big pint I hate on the preordered 2019 (and 2018) version: I need to switch tabs between Nav, Levels and Info and cannot see Info all the time when I have levels open. I suggest to have the Levels always on right side to assist edit and Info+ Nav always available on...
It is sometimes difficult to move the sliders at the smallest increments available with a mouse cursor . With a small toggle to the right of each slider this is possible with clicks. I don’t see how to attach an image here but if you have Affinity Photo you can see what I mean in...

Average rating: 5.0

Average rating: 5.0
3 Comments
“Enable Filters” shouldn’t even be an option, because it should be enabled all the time. There is zero benefit for disabling filters, since it’s not filtering out anything unless you also choose a filter condition. Thank you.

Average rating: 4.8

Average rating: 4.8
2 Comments
I was just wondering …other than renaming each version of photos created with different presets is there a way to easily determine upon reviewing images later which presets have been applied. Maybe I am missing something. I know that you can look at the thumbnails when applying to get an idea of what the image...
I would like to be able to undock filters from the panel so I can enlarge them such as the curves panel and panels when I’m using a filter so I don’t have to scroll up and down so much.
First of all. ON1 has an incredible number of good features. Impressive. With my first idea I want to address the wokflow. In every corner there are icons and tabs, or sliders. I am looking again and again in all 4 directions. I wish to bring the palettes together more. That means to merge functions...

Average rating: 0

Please rate
Leave a Comment
The bright Windows File menu area at the top of the software is very distracting in an otherwise dark user interface. A dark menu would be great!
Sometimes all I want to do is copy & paste one filter with certain settings to several photos without using presets and without overwriting the present filter stack in each image.
In Effects Module, I have a photo with multiple filters. I want to reorder the filters in the stack. I like to use Solo Mode so the filters only show the name of the filter. When I click (and hold) on a filter to move it in the stack, it automatically expands and pushes the...
At present it is always Blues, Aachen, Campari, Timeless and Branagh. I would love to be able to have my 5 favorites displayed instead of having to search through “More” or create a preset.
The Browse module is top right on the screen, but the browse options are bottom left. Massive pain on a 27inch screen. Could the browse options move to the top of the screen (similar way in which the gradient options appear when the gradient tool is selected).
Sometimes it is handy to change saturation depending on luminosity.

Average rating: 5.0

Average rating: 5.0
1 Comment
When doing work in curves (either in Develop or in Tone Enhancer in effects) it would help a lot to be able to do the following: Remove a point from the curve Reset one curve only (i.e. remove all points) For Tone Enhancer additionally: reset the whole Curves section, without resetting all the filter settings

Average rating: 4.8

Average rating: 4.8
1 Comment
The problem is how to calibrate the screen brightness for editing. This can be an issue if the screen brightens forces the apparent 18% gray lighter or darker that normal.  Some photographers shoot an 18% gray target and/or white card with each session so that they can accurately color balance their work in post-processing.  I...
Click the soft proofing icon and the border around the photo turns white. I guess it is suppose to simulate paper. But on a 27 inch screen the white glare makes it difficult to see the subtle difference between before and after. I can get around it by expanding the image to 100% but why?...
I prefer the Filmstrip View and would like to be able to set a preference so that the application defaults to this view and stays with it when moving between browse and develop.  (The application should support selecting a default view and sticking with it.)

Average rating: 5.0

Average rating: 5.0
2 Comments
The histogram in On1 Photo Raw does not have the left and right side “walls” clearly indicated.  The histogram box blends into the rest of the right panel making it impossible to see if the levels are actually at the left or right walls without turning on clipping warnings.  Compare to Lightroom Classic CC histogram,...
When large files are processed that require saving as PSB, this warning pops up midway and interrupts the saving process. It is certainly useful when it happens randomly, to make sure all is understood. But when large PSB files are the standard workflow, having this interruption can become bothersome. It would be nice to have...

Average rating: 4.0

Average rating: 4.0
1 Comment
Having used the tethered shooting mode this weekend, I would like to make two recommendations: using a colored button for the “Fire” command.  When going back and forth between subject, camera, and software, a colored button stand out and be easier to find quickly to get the next shot – maybe red or a red...

Average rating: 4.6

Average rating: 4.6
6 Comments
It would be really helpful to have golden rule/fibonacci grids available. They’re available in LR and I regularly crop with them. A quick fix which would be easily to provide users is a series of grids that can be downloaded as textures and used temporarily and then deleted after cropping. Better would be grids that...
I would like to be able to hide tabs in the Browse panel – not just close the pane. So – two levels – show/hide and open/close (=todays show/hide). Applicable to all the panes. And separate Cataloged folders, Local drives and Cloud storage to individual tabs.
Now the albums are sorted alphabeticly and mixed. Better to have Smart albums on top, Albums in the bottom (or the other way around). Maybe make better (=bigger) symbols to tell them apart. And hierarcy with folders – all my travel-albums in one folder, animal-albums in another…
Could the app be made to retain the workspace preferences e.g. If I collapse the nav panel to maximise screenspace it’s expanded again next time I open the plugin at the moment.

How You Buy | How You Own

When you purchase ON1 Photo RAW 2019 you receive a perpetual license. That means the day you purchase ON1, you own it forever. No subscription. If you decide to become a member of ON1 Plus Pro, you will also receive a perpetual license of the latest versions of all the ON1 apps as part of your membership.

ON1 Photo RAW 2019

Free Trial

Fully functional for 30 days [?]

Your info is never shared.

ON1 Photo RAW 2019

$79.99

Upgrade

for ON1 product owners [?]

Buy Now

30-day Money-back Guarantee

ON1 Photo RAW 2019

$99.99

Full Version

for new customers

Buy Now

30-day Money-back Guarantee

ON1 Photo RAW 2018

New ON1 Photo RAW 2018.5

Get an instant discount + bonus extras!

Email subscribers get the lowest prices! Subscribe and get an immediate discount. You may opt out at any time. View our privacy policy for GDPR compliance.