About the ON1 Photo RAW Project

The ON1 Photo RAW Project gives you the chance to be a part of what we're developing at ON1. You have a voice in the future of photo editing. Your ideas will help us deliver the best available apps for photography, give us insight into what's most important, and help spark innovation.

You must log in to submit an idea.

Share Your Ideas

Share your ideas for new Photo RAW features. Make sure you write a convincing description. Remember, people won't be able to give an idea a high rating unless they understand the idea completely.

Tell Your Friends

With supporters, your ideas will get higher ratings. In fact, tell everyone you know to support your idea. The more ratings an idea gets, the more likely it will be sent to our product development team.

ON1 Will Review It

After an idea reaches 200 ratings with a 3-star or higher rating, the project team will review the details and begin asking questions. We can't put every good idea into development, but we'll try!

ON1 Photo RAW Ideas

Average rating: 5.0

Average rating: 5.0
Leave a Comment
Would like to have a feature added to new luminosity window bar. Holding down a key to create automatically a left and right fixed distance set points that is equal to a ZONE. then drag that zone set window distance left and right. This will select a specific ZONE to mask.

Average rating: 0

Please rate
Leave a Comment
The luminosity masking possibilities in effects and in local adjustments from on1 PR 2018 are great. Love to see these feature in the layers module as well. Also transforming and moving masks in layers would be nice, like flipping, rotating. In overall, more masking, aligning and transforming features is on my with list for the layers module.

Average rating: 0

Please rate
Leave a Comment
Photoshop etc has a quick selection tool that allows some damn good cut-outs – this is a main tool that we use here as we do a lot of composits and not all subjects are easy to do with a masking brush – and can take ages compared to doing it in Photoshop with the...

Average rating: 5.0

Average rating: 5.0
1 Comment
How about a range of geometric shaped and “smart” selection tools like in photoshop or paintshop pro and the ability to copy and move selections from one image to another and between different layers please?

Average rating: 4.6

Average rating: 4.6
1 Comment
Sometimes I want to apply a mask I created in Layers to a filter in Effects. This does not seem to be possible in Photo Raw 2017 or the 2018 beta. I can copy and paste masks among layers in Layers and among filters in Effects, but I cannot bridge the gap between Layers and...

Average rating: 5.0

Average rating: 5.0
1 Comment
Now that there is a color mask in RAW 2018, adding a slider to be able to change the color  selected (and maybe hue and saturation) could be a nice feature to have. I have tried the tint and temp sliders and even used the paint in color feature but having a slider that changes...

Average rating: 4.5

Average rating: 4.5
1 Comment
I love that you included a luminosity mask option. I think it would be far more useful if you could vary the mask intensity either up or down to increase or decrease the amount of luminosity included in the mask. Better yet  if you had 10 or 12 different mask intensities to pick from or...

Average rating: 0

Please rate
Leave a Comment
For years I have asked and asked FXHOME Photokey to add an extension to allow me to use their tool inside LIGHTROOM. They claimed “No way to do this since we need layers”. HAHAHA. Well ON1 sure showed them. Layers was not at all impossible to do. YOU DID IT. Why not give us (initially)...

Average rating: 4.7

Average rating: 4.7
2 Comments
at this point you can add a mask to a single effect or add a mask to all the effects. Most of the time I’ve got a group of effects that have the same mask and now I copy the mask between those effects, but it makes changing the mask later on more work.  So...

Average rating: 3.7

Average rating: 3.7
Leave a Comment
Hi currently the ON1 Photo RAW 2017 Masking Canvas has gray and white tiles. Please add feature to be able to choose different Masking Canvas colors. It is very difficult using this Mask combination when your images contains white and gray colors. Adobe FireWorks CS6 has the ability to change the Canvas color to any color...

Average rating: 5.0

Average rating: 5.0
Leave a Comment
hallo, instead of painting with a masking brush 30% opacity on  amask to decrease its effect, it would be very helpful, like photoshop, to change density of the mask and make black grey,…   best regards marc

Average rating: 4.8

Average rating: 4.8
1 Comment
Hi, just watched a Nicolesy video which runs through the tilt shift effect (https://www.on1.com/blog/on1-short-clip-simulate-a-tilt-shift-lens/), also demonstrated is how to correct brush stokes made in error using the ‘Erase Brush Strokes’ tool (see 5:20) which does a great job, far better than just +/- masking brushes or perfect brush. I have been advised that the Erase...

Average rating: 5.0

Average rating: 5.0
Leave a Comment
I would like a cancel button on quick mask, I often run it over the wrong layer and have to wait ages for it to finish.

Average rating: 5.0

Average rating: 5.0
1 Comment
Sometimes I want to mask out an object which is too similar in colour to the background for the perfect brush to work.  So, I mask it manually with the ‘Control Click’  method.  Having surrounded the object with a think line of mask, I then want to fill in a larger area, so it would...

Average rating: 4.9

Average rating: 4.9
6 Comments
REALLY miss this tool as it was a wonderful starting point for any complex masking project.  Perfect brush is good but not great.

Average rating: 4.8

Average rating: 4.8
Leave a Comment
Inspired by Blake Rudis videos and recent usage of Lumenzia, I think we’ve got two RAW facilities, which are a bit under-utilised: 1) Luminosity masks – without further ability to tweak its curves (luminosity), it’s a half-way solution 2) When you apply any protection measures – Apply To, protection of Higlights, Shadows, Skin, setting the...

Average rating: 4.7

Average rating: 4.7
2 Comments
When turned on the image is separated into 10 zone from black to white.   You can select any 1 or more of the zones and apply a filter/effect, such as noise reduction.  Typically noise reduction is only needed in darker zones; there is usually very little need to apply noise reduction to brighter zones....

Average rating: 4.8

Average rating: 4.8
5 Comments
I often find the maximum feathering of 100 still makes my masks edges too hard when I want smooth transitions. So either the feathering should be a lot smoother, or perhaps there could be provided a possibility to blur masks.

Average rating: 4.9

Average rating: 4.9
3 Comments
I think Luminosity Mask is a great tool to make localized adjustments.I would like to suggest some improvements to it to extend its power and range of cases where it can be used.I would like to have more control over how the luminosity mask gray scale is built.Sometimes I would like to make the dark...

Average rating: 4.9

Average rating: 4.9
5 Comments
The ability to Quick Mask is in Effects 10.5. Whey it was removed in Raw is beyond my comprehension. Please put it back in the Effects Toolbar (e.g. near the masking brush) as it is in 10.5!

Average rating: 4.8

Average rating: 4.8
8 Comments
The use of PR LAYERS most often implies masking one or more layers. Besides, these layers shall be adjusted in tone, color, and effects (in PR DEVELOP and/or EFFECTS) to get an appropriate global balance/harmony between them. At present, new (additional) masking is necessary in DEVELOP/EFFECTS for that purpose (if not  a “guess and try”...

Average rating: 4.9

Average rating: 4.9
3 Comments
I’ve been using the “apply to” and “protect” highlights, shadows, and mid-tones controls.  I presume that under the hood of RAW these are implemented with some sort of luminosity mask.  It would be really useful if this mask were viewable (to see whats affected), editable (to add or delete areas of interest), and could be...

Average rating: 4.8

Average rating: 4.8
4 Comments
I would like to have an option to select a particular color and then automatically create a mask based on that color selection. e.g if you had a photo of a daffodil and select the yellow of the flower, i would like to use a color picker to select the yellow and ON1 Raw automatically...

Average rating: 4.6

Average rating: 4.6
1 Comment
Maybe I have missed it, but i would appreciate a way to set the Show Mask and View Mode options in the Mask menu.  I always want to show the Mask in Develop and I almost always want the red overlay.  Right now I have to go back and reset these every time I open...

Average rating: 5.0

Average rating: 5.0
1 Comment
when using the perfect brush, most often the results give you a fringe at he edges of mask, example a dark line where say the sky and leaves meet. Lightroom has this problem too when painting in adjustments with auto mask on. If we could have a feather amount to the edges where things like...

Average rating: 4.9

Average rating: 4.9
1 Comment
It would be really useful to be able to use a short cut key, such as the Alt key to produce a mask that would make it easier to judge the details that will be sharpened in a photo.  The same could be said for noise and detail. I have no doubt that On1 will...

Average rating: 0

Please rate
Leave a Comment
Would like the ability to develop a mask in PS (easier and better tools), then Copy to Clipboard (Windows), Paste into a mask in OnOne. Of course, for the same image.

Average rating: 4.8

Average rating: 4.8
1 Comment
Just saw one of your competitors has non destructive layer masking – they call it Live Mask. Non destructive layer masking would be a great thing to compliment all the great features that ON1 RAW seems to be going to. It is a little disappointing that the original file turns into a PSD file with...

Average rating: 5.0

Average rating: 5.0
2 Comments
Hi, When a Luminosity Mask is created in Effects, it appears to be a middle gray mask (I don’t know what else to call it). It would be great to add a slider to the Luminosity Mask, so one can select, OR CHANGE, the mask based on the luminosity value selected by the slider.

Average rating: 4.8

Average rating: 4.8
1 Comment
Can you guys please add a quick selection tool to extract parts of one picture and add it to another, or to mask parts of the photo without affecting the entire image?

How You Buy | How You Own

When you purchase ON1 Photo RAW 2018 you receive a perpetual license. That means the day you purchase ON1, you own it forever. No subscription. If you decide to become a member of ON1 Plus Pro, you will also receive a perpetual license of the latest versions of all the ON1 apps as part of your membership.

  • ON1 Photo RAW 2018 Upgrade
  • $99.99

    Upgrade

    For owners of any ON1 product


  • ON1 Photo RAW 2018
  • HDR, Pano, & Masking Courses
  • Monthly Loyalty Rewards
  • Free Technical Support
  • For Mac and Windows
  • 30-day Money Back Guarantee
  •  
  •  
  •  
  •  
Upgrade
  • ON1 Photo RAW 2018
  • $119.99

    Full

    For new customers


  • ON1 Photo RAW 2018
  • HDR, Pano, & Masking Courses
  • Monthly Loyalty Rewards
  • Free Technical Support
  • For Mac and Windows
  • 30-day Money Back Guarantee
  •  
  •  
  •  
  •  
Buy Now
  • ON1 Plus Pro
  • $149.99 $129.99/yr

    ON1 Plus Pro

    For owners & new customers


  • ON1 Photo RAW 2018 (perpetual license)
  • HDR, Pano, & Masking Courses
  • FREE upgrades with active membership
  • Trackable progress on all video courses
  • Private library with hundreds of videos
  • 7 additional courses coming in 2018
  • Monthly Loyalty Rewards
  • Free Technical Support
  • For Mac and Windows
  • 30-day Money Back Guarantee
Join Now